If you’ve been waiting for the latest Geek Bar release, you’ve probably heard about the new Geek Bar Pulse X2 and are wondering what makes it different. You may be looking for a genuine Geek Bar Pulse X2 review to understand its features, performance, flavors, and whether this high-capacity vape is the right choice for you. We’re breaking down everything you need to know, from its 50,000-puff capacity and dual modes to its upgraded display, battery, and overall design.
Yes, the Geek Bar Pulse X2 is worth it for most daily vapers. The Geek Bar Pulse X2 is a rechargeable disposable vape with 18 mL of nicotine salt e-liquid, a 1000 mAh battery, a 0.6 ohm dual mesh coil, and a 3D curved screen. It delivers up to 50,000 puffs in Regular Mode or 25,000 puffs in Pulse Mode, costs $19.99 to $24.99, and comes in 17 flavors.
Key Takeaways
- Puffs: up to 50,000 in Regular Mode, 25,000 in Pulse Mode
- Price: $19.99 to $24.99 at most authorized retailers
- Biggest upgrade: the 1000 mAh battery, up from 820 mAh on the Pulse X
- Flavors: 17 total, including a five-flavor Bull Edition
- Best for: daily vapers who want one device to last weeks, not days
How we tested: our team ran three Geek Bar Pulse X2 units through daily use for four weeks and sampled all 17 flavors from the stock we carry. Specs below are cross-checked against the manufacturer's sheet and our own measurements.
Explore Our Categories
Geek Bar Pulse X2 Specs at a Glance
Here is the short version of what you are buying.
Spec |
Geek Bar Pulse X2 50K |
Puff count |
Up to 50,000 (Regular Mode) / 25,000 (Pulse Mode) |
E-liquid capacity |
18 mL nicotine salt |
Nicotine strength |
5% (50 mg) |
Battery |
1000 mAh, rechargeable |
Coil |
0.6 ohm dual mesh |
Chipset |
VPU power management |
Charging |
USB Type-C, around 80% in 20 minutes |
Display |
3D curved screen with battery and e-liquid readouts |
Lighting |
Binary Halo LED ring |
Airflow |
Adjustable bottom switch |
Flavors |
17, including a five-flavor Bull Edition |
Typical price |
$19.99 to $24.99 |
What Is New Compared to the Geek Bar Pulse X
If you already own a Geek Bar Pulse X, the obvious question is whether the sequel earns your money.
Feature |
Pulse X |
Pulse X2 |
Max puffs |
25,000 |
50,000 |
Pulse Mode puffs |
15,000 |
25,000 |
E-liquid |
18 mL |
18 mL |
Battery |
820 mAh |
1000 mAh |
Screen |
Flat display |
3D curved screen |
Notice that the e-liquid capacity did not change. Geek Bar doubled the puff count by making the coil and wick more efficient, not by adding more juice. The VPU chipset meters power more precisely, so each puff draws less liquid.
Geek Bar Pulse X2 vs Geek Bar Pulse 2
These two devices get mixed up constantly, and they are not the same product. The Geek Bar Pulse X2 is the 50,000 puff flagship with an 18 mL capacity and a 1000 mAh battery. The Geek Bar Pulse 2 is the smaller 25,000 puff model with 16 mL of e-liquid and an 800 mAh battery.
Pick the Pulse X2 if you want maximum runtime. Pick the Pulse 2 if you want a more compact device and a lower up-front price.
Battery Life and Charging
The 1000 mAh cell is the single biggest quality-of-life upgrade on the Geek Bar Pulse X2. On the older Pulse X, heavy users were reaching for the cable most evenings. With the X2, we usually get through a full day and into the next morning before the screen starts warning us.
Charging runs through USB Type-C. Plug the Geek Bar Pulse X2 into a 2-amp source, and you are back to roughly 80% in about 20 minutes. One thing to know: charge time depends heavily on your adapter. A slow laptop port will roughly double it, so use a proper wall brick if you want the quick turnaround.
Regular Mode vs Pulse Mode
Regular Mode runs at standard power. You get a tighter draw, cooler vapor, and the full 50,000 puff rating.
Pulse Mode pushes more power to the coil. Clouds get bigger, the flavor hits harder, and the rating drops to 25,000 puffs.
Here is the simple rule we give customers: use Regular Mode as your default all day, then flip to Pulse Mode when you want a bigger hit. Treat Pulse Mode like a boost button, not a setting you leave on. Use this Geek Bar Pulse X2 vape guide as your quick reference during the first week you own the device, and the modes will become second nature.
The airflow switch sits on the bottom. It is a small slider, and it feels stiff out of the box, but it loosens up after a few days.
All 17 Geek Bar Pulse X2 Flavors
Older reviews still list 14 or 15 flavors, so here is the current, complete Geek Bar Pulse X2 flavor list.
Bull Edition (5 Flavors)
These energy-drink-inspired blends are the reason the Pulse X2 got so much attention at launch.
• Blue Razz Bull: tart blue raspberry over a sweet energy-drink base
• Coco Berry Bull: coconut and mixed berry, the most unusual of the five
• Peach Bull: ripe peach with a crisp finish
• Strawberry Bull: the sweetest of the group, and our best seller
• Watermelon Bull: juicy watermelon with a light citrus edge
Standard Flavors (12 Flavors)
• Banana Taffy Freeze: creamy banana candy with a cool finish
• Blueberry Jam: thick, jammy, and dessert-leaning
• Miami Mint: clean spearmint, the go-to palate reset
• Orange Fcuking FAB: sharp citrus, one of the newest additions
• Peach Slush: peach with a frozen-drink texture
• Pink & Blue: the classic cotton-candy-style blend
• Sour Fcuking FAB: heavy sour candy, not for everyone
• Strawberry B-Burst: bright strawberry, lighter than Strawberry Bull
• Strawberry Watermelon: a balanced two-fruit mix
• Watermelon Ice: the most reordered flavor in our shop
• White Peach Raspberry: soft peach with a tart raspberry lift
• Wild Cherry Slush: dark cherry, syrupy and bold
If you are new to the brand, start with Watermelon Ice or Miami Mint. Both are easy to enjoy for a full tank. Every flavor above is in stock in the product grid at the top of this page.
Design, Screen, and Everyday Feel
The Geek Bar Pulse X2 is compact for an 18 mL device. It sits comfortably in a jeans pocket, and the rounded edges mean it does not dig in when you sit down.
The 3D curved screen is the standout feature. It shows your battery percentage and your remaining e-liquid at the same time, and the curve keeps it readable at an angle. You can glance down at your desk and know where you stand without picking the device up.
The Binary Halo light ring pulses when you draw. It looks good, though it draws attention in public, and there is no way to switch it off. That is our main design complaint.
How Long Does a Geek Bar Pulse X2 Last?
A Geek Bar Pulse X2 lasts about six to eight weeks for a moderate vaper. Puff ratings are manufacturer lab figures, so here is a more useful way to think about it: take your daily puff count and divide 50,000 by it.
• 500 puffs a day: about 100 days in Regular Mode
• 800 puffs a day: about 62 days
• 1,200 puffs a day: about 41 days
Cut those numbers in half if you vape mostly in Pulse Mode. Your real total will land below the rating, since draw length affects consumption.
Price, Authenticity, and Where to Buy
The Geek Bar Pulse X2 costs $19.99 to $24.99 at most authorized retailers. Be careful with the low end of that range. Deep discounts on a brand-new release are a common sign of counterfeit stock. Here is how to check an authentic unit:
1. Find the scratch-off security label on the back of the retail box.
2. Scratch the coating to reveal the verification code.
3. Enter the code on Geek Bar’s official verification page, or scan the QR code beside it.
4. A genuine code returns a single confirmation. A code that reports multiple prior checks usually means a cloned label.
Compared to the Pulse X, you pay a few dollars more for double the puffs and a bigger battery. On a cost-per-puff basis, the Geek Bar Pulse X2 wins by a wide margin.
Pros and Cons
What we like:
• Double the puff rating with no increase in e-liquid volume
• The 1000 mAh battery genuinely lasts a full day
• Fast USB-C charging, around 80% in 20 minutes
• The clearest screen we have used on a disposable
• 17 flavors, with the Bull Edition adding real variety
What we don’t like:
• Costs more than the Pulse X
• The halo light cannot be switched off
• The airflow slider is stiff at first
• Puff ratings are manufacturer figures and cannot be independently verified
Who Should Buy It, and Who Should Skip It
Buy it if you vape daily, you hate charging, and you want one device to last weeks instead of days. It is also a good pick if you like switching between a tight draw and a bigger hit.
Skip it if you already own a Pulse X you are happy with, and you rarely finish it. The upgrade is real, but it is not urgent. Skip it, too, if you prefer a discreet device, because the light ring is noticeable.
Frequently Asked Questions
How many puffs is a Geek Bar Pulse X2?
A Geek Bar Pulse X2 delivers up to 50,000 puffs in Regular Mode and 25,000 puffs in Pulse Mode. These are manufacturer figures, and your real total depends on how long you draw and which Mode you use.
Is the Geek Bar Pulse X2 rechargeable?
Yes, the Geek Bar Pulse X2 is rechargeable. It has a 1000 mAh battery and charges over USB Type-C, reaching about 80% in 20 minutes on a 2 amp charger.
How much does the Geek Bar Pulse X2 cost?
The Geek Bar Pulse X2 costs $19.99 to $24.99 at most authorized retailers. Listings below about $16 are worth checking carefully, since heavy discounts on a new release often signal counterfeit stock.
What is the difference between the Pulse X and the Pulse X2?
The Pulse X2 doubles the puff rating from 25,000 to 50,000 and upgrades the battery from 820 mAh to 1000 mAh. It also adds a 3D curved screen. Both models hold 18 mL of e-liquid.
What is the difference between the Pulse X2 and the Pulse 2?
The Pulse X2 is the larger 50,000 puff model with 18 mL of e-liquid and a 1000 mAh battery. The Pulse 2 is the compact 25,000 puff model with 16 mL of e-liquid and an 800 mAh battery.
What nicotine strength is the Geek Bar Pulse X2?
The Geek Bar Pulse X2 uses 5% (50 mg) nicotine salt e-liquid. If you want a nicotine-free option, we also carry zero-nicotine Geek Bar devices.
How long does a Geek Bar Pulse X2 last?
A Geek Bar Pulse X2 lasts about six to eight weeks for a moderate vaper. At 500 puffs a day, it runs roughly 100 days in Regular Mode, and about half that if you stay in Pulse Mode.
How can you tell if a Geek Bar Pulse X2 is fake?
Scratch the security label on the back of the box and enter the code on Geek Bar's official verification page. A genuine code returns a single confirmation, while a code showing multiple prior checks usually points to a cloned label.
The Bottom Line
The Geek Bar Pulse X2 is the most complete disposable Geek Bar that has been shipped. You get double the puffs for a few dollars more, a battery that keeps up with heavy use, and the best screen in the category. The light ring and the stiff airflow slider are minor annoyances against a clear win on value. Keep this Geek Bar Pulse X2 vape guide handy when you compare the device against your current one, then pick your flavor from the full range.
If you are looking to try a new flavor experience or want to try the latest Geek Bar models, explore GeekBarNow.com for a one-stop destination featuring authentic Geek Bar products, detailed information, and trusted updates on the newest releases. Whether you are a returning Geek Bar fan or discovering the brand for the first time, Geek Bar Now makes it easier to find the right device and flavor for your preferences.
